Numerical Study of a Phase Change Material Energy Storage Tank Working with Carbon Nanotube–Water Nanofluid under Ha’il City Climatic Conditions

A numerical investigation of a phase change material (PCM) energy storage tank working with carbon nanotube (CNT)–water nanofluid is performed. The study was conducted under actual climatic conditions of the Ha’il region (Saudi Arabia). Two configurations related to the absence or presence of conductive baffles are studied. The tank is filled by encapsulated paraffin wax as the PCM, and CNT–water nanofluid flows through the capsules. The main goal is to increase the temperature of the PCM to 70 °C in order to store the thermal energy, which can then be used during the night and cloudy weather. Numerical computations are made using the finite element method (FEM) based on actual measured weather conditions. Climate conditions were collected from a weather station located on the roof of the engineering college’s building at the University of Ha’il. The collected data served as input to the numerical model, and the simulations were performed for three months (December, March, and July). The solid CNT volume fraction range was (0 ≤ ϕ ≤ 0.05) and the nanofluid volume flow rate ranged was (0.5 L/min ≤ V ≤ 3 L/min). For both considered cases (with and without baffles), it was found that the use of CNT–nanofluid led to a reduction in the charging time and enhanced its performance. An increase in the volumetric flow rate was found to accelerate the melting process. The best performances of the storage tank occurred during July due to the highest solar irradiation. Furthermore, it was found that the use of baffles had no beneficial effects on the melting process.