Skip to main navigation Skip to search Skip to main content

Evaluation of Mechanical Behavior of CAD/CAM Polymers for Long-term Interim Restoration Following Artificial Aging

  • Mansoura University
  • New Mansoura University
  • General Zagazig Hospital

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

Mechanical properties are crucial parameters for the clinical performance of long-term CAD/CAM interim restorations. This study aimed to evaluate and compare fracture toughness (FT), flexural strength (FS), flexural modulus (FM), microhardness (H), and the brittle index (BI) of three different long-term interim restorative materials after simulated ageing. CAD-Temp; VCT, Everest C-Temp; CT, and PEEK; PK were the materials used. Specimens were divided into subgroup A (control group) with no thermocycling, and subgroup B subjected to 5000 thermocycles between 5 and 55 °C for 30 seconds. FS, FM, FT, H, microstructure, and the brittle index were evaluated. The data was examined using two-way ANOVA and Tukey’s test for post-hoc comparisons. In the VCT group, FS, FT, and H were significantly reduced (p <0.05) after thermocycling. In the PK group, no statistically significant differences (p >0.05) were detected between the aged and non-aged groups. As for the CT group, the tested properties were significantly reduced (p <0.05) after simulated aging condition. The PK group recorded appropriate mechanical behavior both before and after simulating aging, in addition to its better machinability than other materials. The CT group had better mechanical properties before and after ageing, despite the significant reduction in mechanical properties after aging.

Original languageEnglish
Pages (from-to)22-30
Number of pages9
JournalEuropean Journal of Prosthodontics and Restorative Dentistry
Volume31
Issue number1
DOIs
StatePublished - 2023
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • Artificial Aging
  • Interim Restoration
  • Mechanical Properties

Fingerprint

Dive into the research topics of 'Evaluation of Mechanical Behavior of CAD/CAM Polymers for Long-term Interim Restoration Following Artificial Aging'. Together they form a unique fingerprint.

Cite this