The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets

Ali Abd El-Aty; Shi Hong Zhang; Xunzhong Guo; Yong Xu; Ma Yan; Dayoung Chen; Jie Tao

doi:10.1007/978-3-030-75381-8_102

The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets

Ali Abd El-Aty
, Shi Hong Zhang
, Xunzhong Guo
, Yong Xu
, Ma Yan
, Dayoung Chen
, Jie Tao

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

Since high-strength lightweight Al-Li alloys gained much attention recently, investigating the dynamic behavior of high-strength lightweight AA2060-T8 sheets is crucial because of their outstanding mechanical properties. Thus, uniaxial tensile tests were performed under high strain rate conditions using universal testing machines and split Hopkinson tensile bars. The ductility of AA2060-T8 sheets was improved under HSR deformation because of the adiabatic softening with increasing strain rate and the inertia effect, which may diffuse necking, slow down the necking development, and delay the onset of fracture. The present study results can efficiently develop a new manufacturing route based on impact hydroforming technology (IHF) to manufacture sound thin-walled-complex shape components from high-strength lightweight Al-Li alloy sheets at room temperature.

Original language	English
Title of host publication	Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity
Editors	Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, Yoshinori Yoshida
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	1231-1243
Number of pages	13
ISBN (Print)	9783030753801
DOIs	https://doi.org/10.1007/978-3-030-75381-8_102
State	Published - 2021
Externally published	Yes
Event	13th International Conference on the Technology of Plasticity, ICTP 2021 - Virtual, Online Duration: 25 Jul 2021 → 30 Jul 2021

Publication series

Name	Minerals, Metals and Materials Series
ISSN (Print)	2367-1181
ISSN (Electronic)	2367-1696

Conference

Conference	13th International Conference on the Technology of Plasticity, ICTP 2021
City	Virtual, Online
Period	25/07/21 → 30/07/21

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

AA2060-T8
Al-Li alloys
High-speed deformation
Impact hydroforming

Access to Document

10.1007/978-3-030-75381-8_102

Cite this

Abd El-Aty, A., Zhang, S. H., Guo, X., Xu, Y., Yan, M., Chen, D., & Tao, J. (2021). The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets. In G. Daehn, J. Cao, B. Kinsey, E. Tekkaya, A. Vivek, & Y. Yoshida (Eds.), Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity (pp. 1231-1243). (Minerals, Metals and Materials Series). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-030-75381-8_102

Abd El-Aty, Ali ; Zhang, Shi Hong ; Guo, Xunzhong et al. / The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets. Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. editor / Glenn Daehn ; Jian Cao ; Brad Kinsey ; Erman Tekkaya ; Anupam Vivek ; Yoshinori Yoshida. Springer Science and Business Media Deutschland GmbH, 2021. pp. 1231-1243 (Minerals, Metals and Materials Series).

@inproceedings{7ee9435559bb4b4d84585aeeca3df975,

title = "The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets",

abstract = "Since high-strength lightweight Al-Li alloys gained much attention recently, investigating the dynamic behavior of high-strength lightweight AA2060-T8 sheets is crucial because of their outstanding mechanical properties. Thus, uniaxial tensile tests were performed under high strain rate conditions using universal testing machines and split Hopkinson tensile bars. The ductility of AA2060-T8 sheets was improved under HSR deformation because of the adiabatic softening with increasing strain rate and the inertia effect, which may diffuse necking, slow down the necking development, and delay the onset of fracture. The present study results can efficiently develop a new manufacturing route based on impact hydroforming technology (IHF) to manufacture sound thin-walled-complex shape components from high-strength lightweight Al-Li alloy sheets at room temperature.",

keywords = "AA2060-T8, Al-Li alloys, High-speed deformation, Impact hydroforming",

author = "\{Abd El-Aty\}, Ali and Zhang, \{Shi Hong\} and Xunzhong Guo and Yong Xu and Ma Yan and Dayoung Chen and Jie Tao",

note = "Publisher Copyright: {\textcopyright} 2021, The Minerals, Metals \& Materials Society.; 13th International Conference on the Technology of Plasticity, ICTP 2021 ; Conference date: 25-07-2021 Through 30-07-2021",

year = "2021",

doi = "10.1007/978-3-030-75381-8\_102",

language = "English",

isbn = "9783030753801",

series = "Minerals, Metals and Materials Series",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "1231--1243",

editor = "Glenn Daehn and Jian Cao and Brad Kinsey and Erman Tekkaya and Anupam Vivek and Yoshinori Yoshida",

booktitle = "Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity",

address = "Germany",

}

Abd El-Aty, A, Zhang, SH, Guo, X, Xu, Y, Yan, M, Chen, D & Tao, J 2021, The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets. in G Daehn, J Cao, B Kinsey, E Tekkaya, A Vivek & Y Yoshida (eds), Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Minerals, Metals and Materials Series, Springer Science and Business Media Deutschland GmbH, pp. 1231-1243, 13th International Conference on the Technology of Plasticity, ICTP 2021, Virtual, Online, 25/07/21. https://doi.org/10.1007/978-3-030-75381-8_102

The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets. / Abd El-Aty, Ali; Zhang, Shi Hong; Guo, Xunzhong et al.
Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. ed. / Glenn Daehn; Jian Cao; Brad Kinsey; Erman Tekkaya; Anupam Vivek; Yoshinori Yoshida. Springer Science and Business Media Deutschland GmbH, 2021. p. 1231-1243 (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets

AU - Abd El-Aty, Ali

AU - Zhang, Shi Hong

AU - Guo, Xunzhong

AU - Xu, Yong

AU - Yan, Ma

AU - Chen, Dayoung

AU - Tao, Jie

PY - 2021

Y1 - 2021

N2 - Since high-strength lightweight Al-Li alloys gained much attention recently, investigating the dynamic behavior of high-strength lightweight AA2060-T8 sheets is crucial because of their outstanding mechanical properties. Thus, uniaxial tensile tests were performed under high strain rate conditions using universal testing machines and split Hopkinson tensile bars. The ductility of AA2060-T8 sheets was improved under HSR deformation because of the adiabatic softening with increasing strain rate and the inertia effect, which may diffuse necking, slow down the necking development, and delay the onset of fracture. The present study results can efficiently develop a new manufacturing route based on impact hydroforming technology (IHF) to manufacture sound thin-walled-complex shape components from high-strength lightweight Al-Li alloy sheets at room temperature.

AB - Since high-strength lightweight Al-Li alloys gained much attention recently, investigating the dynamic behavior of high-strength lightweight AA2060-T8 sheets is crucial because of their outstanding mechanical properties. Thus, uniaxial tensile tests were performed under high strain rate conditions using universal testing machines and split Hopkinson tensile bars. The ductility of AA2060-T8 sheets was improved under HSR deformation because of the adiabatic softening with increasing strain rate and the inertia effect, which may diffuse necking, slow down the necking development, and delay the onset of fracture. The present study results can efficiently develop a new manufacturing route based on impact hydroforming technology (IHF) to manufacture sound thin-walled-complex shape components from high-strength lightweight Al-Li alloy sheets at room temperature.

KW - AA2060-T8

KW - Al-Li alloys

KW - High-speed deformation

KW - Impact hydroforming

UR - https://www.scopus.com/pages/publications/85112553545

U2 - 10.1007/978-3-030-75381-8_102

DO - 10.1007/978-3-030-75381-8_102

M3 - Conference contribution

AN - SCOPUS:85112553545

SN - 9783030753801

T3 - Minerals, Metals and Materials Series

SP - 1231

EP - 1243

BT - Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity

A2 - Daehn, Glenn

A2 - Cao, Jian

A2 - Kinsey, Brad

A2 - Tekkaya, Erman

A2 - Vivek, Anupam

A2 - Yoshida, Yoshinori

PB - Springer Science and Business Media Deutschland GmbH

T2 - 13th International Conference on the Technology of Plasticity, ICTP 2021

Y2 - 25 July 2021 through 30 July 2021

ER -

Abd El-Aty A, Zhang SH, Guo X, Xu Y, Yan M, Chen D et al. The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets. In Daehn G, Cao J, Kinsey B, Tekkaya E, Vivek A, Yoshida Y, editors, Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Springer Science and Business Media Deutschland GmbH. 2021. p. 1231-1243. (Minerals, Metals and Materials Series). doi: 10.1007/978-3-030-75381-8_102

The High-Speed Deformation Behavior of High-Strength Lightweight Al-Li Alloy Sheets

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this