The feasibility of friction stir spot extrusion-brazing of AA5083-H112 aluminum alloy to brass sheets with Zn interlayer

Moslem Paidar; Mahyuddin K. M. Nasution; Sadok Mehrez; Dmitry Bokov; Vaira Vignesh Ramalingam; Azlan Mohd Zain

doi:10.1016/j.matlet.2021.131084

The feasibility of friction stir spot extrusion-brazing of AA5083-H112 aluminum alloy to brass sheets with Zn interlayer

Moslem Paidar
, Mahyuddin K. M. Nasution
, Sadok Mehrez
, Dmitry Bokov
, Vaira Vignesh Ramalingam
, Azlan Mohd Zain

Mechanical Engineering

Islamic Azad University
Universitas Sumatera Utara
Sechenov First Moscow State Medical University
Amrita Vishwa Vidyapeetham
Universiti Teknologi Malaysia

Research output: Contribution to journal › Article › peer-review

10 Scopus citations

Abstract

The feasibility of friction stir spot extrusion-brazing (FSSEB) of AA5083-H112 and brass sheets by inserting Zn as interlayer was assessed in this paper. Results showed that the FSSEB process had an influential role in the microstructure of the brazed layers at the interface of the AA5083/brass joint. Further, results showed that the Zn interlayer could act as an obstacle and resulted in a significant decrease of detrimental intermetallic compounds at the interface. Besides, it is found that the FSSEB process entirely filled the pre-threaded hole and thereby improved the mechanical intermixing/interlocking features of base alloys and consequently produced a defect-free weld and marvelous tensile/shear strength.

Original language	English
Article number	131084
Journal	Materials Letters
Volume	308
DOIs	https://doi.org/10.1016/j.matlet.2021.131084
State	Published - 1 Feb 2022

Keywords

AA5083-H112
Brass
Friction stir spot extrusion-brazing
Intermetallic alloys and compounds
Microstructure

Access to Document

10.1016/j.matlet.2021.131084

Cite this

@article{604dc03a715d4e889a749d19550afc84,

title = "The feasibility of friction stir spot extrusion-brazing of AA5083-H112 aluminum alloy to brass sheets with Zn interlayer",

abstract = "The feasibility of friction stir spot extrusion-brazing (FSSEB) of AA5083-H112 and brass sheets by inserting Zn as interlayer was assessed in this paper. Results showed that the FSSEB process had an influential role in the microstructure of the brazed layers at the interface of the AA5083/brass joint. Further, results showed that the Zn interlayer could act as an obstacle and resulted in a significant decrease of detrimental intermetallic compounds at the interface. Besides, it is found that the FSSEB process entirely filled the pre-threaded hole and thereby improved the mechanical intermixing/interlocking features of base alloys and consequently produced a defect-free weld and marvelous tensile/shear strength.",

keywords = "AA5083-H112, Brass, Friction stir spot extrusion-brazing, Intermetallic alloys and compounds, Microstructure",

author = "Moslem Paidar and \{K. M. Nasution\}, Mahyuddin and Sadok Mehrez and Dmitry Bokov and Ramalingam, \{Vaira Vignesh\} and Zain, \{Azlan Mohd\}",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier B.V.",

year = "2022",

month = feb,

day = "1",

doi = "10.1016/j.matlet.2021.131084",

language = "English",

volume = "308",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - The feasibility of friction stir spot extrusion-brazing of AA5083-H112 aluminum alloy to brass sheets with Zn interlayer

AU - Paidar, Moslem

AU - K. M. Nasution, Mahyuddin

AU - Mehrez, Sadok

AU - Bokov, Dmitry

AU - Ramalingam, Vaira Vignesh

AU - Zain, Azlan Mohd

PY - 2022/2/1

Y1 - 2022/2/1

N2 - The feasibility of friction stir spot extrusion-brazing (FSSEB) of AA5083-H112 and brass sheets by inserting Zn as interlayer was assessed in this paper. Results showed that the FSSEB process had an influential role in the microstructure of the brazed layers at the interface of the AA5083/brass joint. Further, results showed that the Zn interlayer could act as an obstacle and resulted in a significant decrease of detrimental intermetallic compounds at the interface. Besides, it is found that the FSSEB process entirely filled the pre-threaded hole and thereby improved the mechanical intermixing/interlocking features of base alloys and consequently produced a defect-free weld and marvelous tensile/shear strength.

AB - The feasibility of friction stir spot extrusion-brazing (FSSEB) of AA5083-H112 and brass sheets by inserting Zn as interlayer was assessed in this paper. Results showed that the FSSEB process had an influential role in the microstructure of the brazed layers at the interface of the AA5083/brass joint. Further, results showed that the Zn interlayer could act as an obstacle and resulted in a significant decrease of detrimental intermetallic compounds at the interface. Besides, it is found that the FSSEB process entirely filled the pre-threaded hole and thereby improved the mechanical intermixing/interlocking features of base alloys and consequently produced a defect-free weld and marvelous tensile/shear strength.

KW - AA5083-H112

KW - Brass

KW - Friction stir spot extrusion-brazing

KW - Intermetallic alloys and compounds

KW - Microstructure

UR - https://www.scopus.com/pages/publications/85118506837

U2 - 10.1016/j.matlet.2021.131084

DO - 10.1016/j.matlet.2021.131084

M3 - Article

AN - SCOPUS:85118506837

SN - 0167-577X

VL - 308

JO - Materials Letters

JF - Materials Letters

M1 - 131084

ER -

The feasibility of friction stir spot extrusion-brazing of AA5083-H112 aluminum alloy to brass sheets with Zn interlayer

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this