Nanomaterial solidification inside the storage system by means of finite element method

Mahmoud M. Selim; Rakan A.I. Alrkyan; Bader H.A. Saidan; AWAD WIDAA TINEBOUR

doi:10.1016/j.est.2023.107235

Nanomaterial solidification inside the storage system by means of finite element method

Mahmoud M. Selim
, Rakan A.I. Alrkyan
, Bader H.A. Saidan
, AWAD WIDAA TINEBOUR

Mathematics

Prince Sattam Bin Abdulaziz University

Research output: Contribution to journal › Article › peer-review

Abstract

To reduce the required time for solidification, the system of present study has been combined with fin. The testing base material was mixed with water to generate homogeneous mixture with higher conductivity. The numerical procedure for modeling this unsteady process has been validated and influence of loading nanoparticles has been evaluated. The impact of diameter of powders on treatment of system has been involved with considering conductivity of nanomaterial as function of this parameter. The style of mesh was adapted with location of ice front. As diameter of powders declines from 50 to 40 and 30, the required time firstly decreases 49.25 % then it increases about 24.99 %. Loading nanoparticles with higher concentration can reduce the time of process about 41.22 %. The impact of concentration for middle level of diameter is more sensible.

Original language	English
Article number	107235
Journal	Journal of Energy Storage
Volume	65
DOIs	https://doi.org/10.1016/j.est.2023.107235
State	Published - 15 Aug 2023

Keywords

Extended surface
FEM
Nanoparticles
Rate of solidification
Trapezoidal container

Access to Document

10.1016/j.est.2023.107235

Cite this

@article{ebed183cdea74b9ab18f539797c538b7,

title = "Nanomaterial solidification inside the storage system by means of finite element method",

abstract = "To reduce the required time for solidification, the system of present study has been combined with fin. The testing base material was mixed with water to generate homogeneous mixture with higher conductivity. The numerical procedure for modeling this unsteady process has been validated and influence of loading nanoparticles has been evaluated. The impact of diameter of powders on treatment of system has been involved with considering conductivity of nanomaterial as function of this parameter. The style of mesh was adapted with location of ice front. As diameter of powders declines from 50 to 40 and 30, the required time firstly decreases 49.25 \% then it increases about 24.99 \%. Loading nanoparticles with higher concentration can reduce the time of process about 41.22 \%. The impact of concentration for middle level of diameter is more sensible.",

keywords = "Extended surface, FEM, Nanoparticles, Rate of solidification, Trapezoidal container",

author = "Selim, \{Mahmoud M.\} and Alrkyan, \{Rakan A.I.\} and Saidan, \{Bader H.A.\} and \{WIDAA TINEBOUR\}, AWAD",

note = "Publisher Copyright: {\textcopyright} 2023 Elsevier Ltd",

year = "2023",

month = aug,

day = "15",

doi = "10.1016/j.est.2023.107235",

language = "English",

volume = "65",

journal = "Journal of Energy Storage",

issn = "2352-152X",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Nanomaterial solidification inside the storage system by means of finite element method

AU - Selim, Mahmoud M.

AU - Alrkyan, Rakan A.I.

AU - Saidan, Bader H.A.

AU - WIDAA TINEBOUR, AWAD

PY - 2023/8/15

Y1 - 2023/8/15

N2 - To reduce the required time for solidification, the system of present study has been combined with fin. The testing base material was mixed with water to generate homogeneous mixture with higher conductivity. The numerical procedure for modeling this unsteady process has been validated and influence of loading nanoparticles has been evaluated. The impact of diameter of powders on treatment of system has been involved with considering conductivity of nanomaterial as function of this parameter. The style of mesh was adapted with location of ice front. As diameter of powders declines from 50 to 40 and 30, the required time firstly decreases 49.25 % then it increases about 24.99 %. Loading nanoparticles with higher concentration can reduce the time of process about 41.22 %. The impact of concentration for middle level of diameter is more sensible.

AB - To reduce the required time for solidification, the system of present study has been combined with fin. The testing base material was mixed with water to generate homogeneous mixture with higher conductivity. The numerical procedure for modeling this unsteady process has been validated and influence of loading nanoparticles has been evaluated. The impact of diameter of powders on treatment of system has been involved with considering conductivity of nanomaterial as function of this parameter. The style of mesh was adapted with location of ice front. As diameter of powders declines from 50 to 40 and 30, the required time firstly decreases 49.25 % then it increases about 24.99 %. Loading nanoparticles with higher concentration can reduce the time of process about 41.22 %. The impact of concentration for middle level of diameter is more sensible.

KW - Extended surface

KW - FEM

KW - Nanoparticles

KW - Rate of solidification

KW - Trapezoidal container

UR - https://www.scopus.com/pages/publications/85151290579

U2 - 10.1016/j.est.2023.107235

DO - 10.1016/j.est.2023.107235

M3 - Article

AN - SCOPUS:85151290579

SN - 2352-152X

VL - 65

JO - Journal of Energy Storage

JF - Journal of Energy Storage

M1 - 107235

ER -

Nanomaterial solidification inside the storage system by means of finite element method

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this