Modeling and investigating electric power output maximization for piezoelectric energy harvester

Abeer Abdullah Al Anazi; Oriza Candra; Abdeljelil Chammam; Haydar Abdulameer Marhoon; Inas Ridah Ali; Ibrahim H. Al-Kharsan; Reza Alayi; Yaser Ebazadeh; Morteza Aladdin

doi:10.1063/5.0141848

Modeling and investigating electric power output maximization for piezoelectric energy harvester

Abeer Abdullah Al Anazi, Oriza Candra, Abdeljelil Chammam, Haydar Abdulameer Marhoon, Inas Ridah Ali, Ibrahim H. Al-Kharsan, Reza Alayi, Yaser Ebazadeh, Morteza Aladdin

Electrical Engineering

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

In this study, energy harvesting using a two-layer piezoelectric sensor in non-linear single-mode mode was investigated, and the optimal performance conditions for power extraction were investigated. Non-linear equations or non-linear electric enthalpy proposal were obtained using Lagrange’s method. In addition, the model was identified with the help of perturbation methods and based on experimental results. The results indicate the presence of second-order damping and third-order stiffness with magnitudes of 2.8 × 10⁶ and −3.9 × 10²¹. Finally, non-linear energy harvesting was investigated, and the electrical resistance for an optimal electrical power of 185.2 was obtained.

Original language	English
Article number	055020
Journal	AIP Advances
Volume	13
Issue number	5
DOIs	https://doi.org/10.1063/5.0141848
State	Published - 1 May 2023

Access to Document

10.1063/5.0141848

Cite this

@article{c7f1298e2fe74002a2ce72c9d08b204f,

title = "Modeling and investigating electric power output maximization for piezoelectric energy harvester",

abstract = "In this study, energy harvesting using a two-layer piezoelectric sensor in non-linear single-mode mode was investigated, and the optimal performance conditions for power extraction were investigated. Non-linear equations or non-linear electric enthalpy proposal were obtained using Lagrange{\textquoteright}s method. In addition, the model was identified with the help of perturbation methods and based on experimental results. The results indicate the presence of second-order damping and third-order stiffness with magnitudes of 2.8 × 106 and −3.9 × 1021. Finally, non-linear energy harvesting was investigated, and the electrical resistance for an optimal electrical power of 185.2 was obtained.",

author = "\{Al Anazi\}, \{Abeer Abdullah\} and Oriza Candra and Abdeljelil Chammam and Marhoon, \{Haydar Abdulameer\} and Ali, \{Inas Ridah\} and Al-Kharsan, \{Ibrahim H.\} and Reza Alayi and Yaser Ebazadeh and Morteza Aladdin",

note = "Publisher Copyright: {\textcopyright} 2023 Author(s).",

year = "2023",

month = may,

day = "1",

doi = "10.1063/5.0141848",

language = "English",

volume = "13",

journal = "AIP Advances",

issn = "2158-3226",

publisher = "American Institute of Physics",

number = "5",

}

TY - JOUR

T1 - Modeling and investigating electric power output maximization for piezoelectric energy harvester

AU - Al Anazi, Abeer Abdullah

AU - Candra, Oriza

AU - Chammam, Abdeljelil

AU - Marhoon, Haydar Abdulameer

AU - Ali, Inas Ridah

AU - Al-Kharsan, Ibrahim H.

AU - Alayi, Reza

AU - Ebazadeh, Yaser

AU - Aladdin, Morteza

PY - 2023/5/1

Y1 - 2023/5/1

N2 - In this study, energy harvesting using a two-layer piezoelectric sensor in non-linear single-mode mode was investigated, and the optimal performance conditions for power extraction were investigated. Non-linear equations or non-linear electric enthalpy proposal were obtained using Lagrange’s method. In addition, the model was identified with the help of perturbation methods and based on experimental results. The results indicate the presence of second-order damping and third-order stiffness with magnitudes of 2.8 × 106 and −3.9 × 1021. Finally, non-linear energy harvesting was investigated, and the electrical resistance for an optimal electrical power of 185.2 was obtained.

AB - In this study, energy harvesting using a two-layer piezoelectric sensor in non-linear single-mode mode was investigated, and the optimal performance conditions for power extraction were investigated. Non-linear equations or non-linear electric enthalpy proposal were obtained using Lagrange’s method. In addition, the model was identified with the help of perturbation methods and based on experimental results. The results indicate the presence of second-order damping and third-order stiffness with magnitudes of 2.8 × 106 and −3.9 × 1021. Finally, non-linear energy harvesting was investigated, and the electrical resistance for an optimal electrical power of 185.2 was obtained.

UR - http://www.scopus.com/inward/record.url?scp=85159775033&partnerID=8YFLogxK

U2 - 10.1063/5.0141848

DO - 10.1063/5.0141848

M3 - Article

AN - SCOPUS:85159775033

SN - 2158-3226

VL - 13

JO - AIP Advances

JF - AIP Advances

IS - 5

M1 - 055020

ER -

Modeling and investigating electric power output maximization for piezoelectric energy harvester

Abstract

Access to Document

Other files and links

Fingerprint

Cite this