Investigation on micro-slotting of polymer nanocomposites: Cutting forces

Islam Shyha; Dehong Huo; Bao Le; Guoyu Fu; Essam Soliman; Bandar Alzahrani

doi:10.3233/978-1-61499-902-7-57

Investigation on micro-slotting of polymer nanocomposites: Cutting forces

Islam Shyha
, Dehong Huo
, Bao Le
, Guoyu Fu
, Essam Soliman
, Bandar Alzahrani

Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Graphene and halloysite nano-clay have been employed as reinforcements in polymeric nanocomposites due to their superior properties such as high strength, thermal conductivity while epoxy and polyester (PE) are the most popular polymers that have been widely applied in industry as structural material. In the present study, GNP and halloysite nano-clay were used as nano-fillers to reinforce epoxy and polyester matrix, respectively. Micro end milling trials were conducted on a 3-axis ultraprecision CNC machine tool and cutting forces were measured. Higher cutting forces were recorded when cutting graphene/epoxy specimens compared with the nano-clay/PE at higher cutting speed of 188.5 m/min.

Original language	English
Title of host publication	Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research
Editors	Peter Thorvald, Keith Case
Publisher	IOS Press BV
Pages	57-62
Number of pages	6
ISBN (Electronic)	9781614994398
DOIs	https://doi.org/10.3233/978-1-61499-902-7-57
State	Published - 2018
Event	16th International Conference on Manufacturing Research, ICMR 2018 - Skovde, Sweden Duration: 11 Sep 2018 → 13 Sep 2018

Publication series

Name	Advances in Transdisciplinary Engineering
Volume	8
ISSN (Print)	2352-751X
ISSN (Electronic)	2352-7528

Conference

Conference	16th International Conference on Manufacturing Research, ICMR 2018
Country/Territory	Sweden
City	Skovde
Period	11/09/18 → 13/09/18

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

Cutting force
Micro-milling
Nanocomposites
Nanomaterials

Access to Document

10.3233/978-1-61499-902-7-57

Cite this

Shyha, I., Huo, D., Le, B., Fu, G., Soliman, E., & Alzahrani, B. (2018). Investigation on micro-slotting of polymer nanocomposites: Cutting forces. In P. Thorvald, & K. Case (Eds.), Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research (pp. 57-62). (Advances in Transdisciplinary Engineering; Vol. 8). IOS Press BV. https://doi.org/10.3233/978-1-61499-902-7-57

Shyha, Islam ; Huo, Dehong ; Le, Bao et al. / Investigation on micro-slotting of polymer nanocomposites : Cutting forces. Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research. editor / Peter Thorvald ; Keith Case. IOS Press BV, 2018. pp. 57-62 (Advances in Transdisciplinary Engineering).

@inproceedings{96bc3f82f88c456ca64d89728ca8c3a9,

title = "Investigation on micro-slotting of polymer nanocomposites: Cutting forces",

abstract = "Graphene and halloysite nano-clay have been employed as reinforcements in polymeric nanocomposites due to their superior properties such as high strength, thermal conductivity while epoxy and polyester (PE) are the most popular polymers that have been widely applied in industry as structural material. In the present study, GNP and halloysite nano-clay were used as nano-fillers to reinforce epoxy and polyester matrix, respectively. Micro end milling trials were conducted on a 3-axis ultraprecision CNC machine tool and cutting forces were measured. Higher cutting forces were recorded when cutting graphene/epoxy specimens compared with the nano-clay/PE at higher cutting speed of 188.5 m/min.",

keywords = "Cutting force, Micro-milling, Nanocomposites, Nanomaterials",

author = "Islam Shyha and Dehong Huo and Bao Le and Guoyu Fu and Essam Soliman and Bandar Alzahrani",

note = "Publisher Copyright: {\textcopyright} 2018 The authors and IOS Press. All rights reserved.; 16th International Conference on Manufacturing Research, ICMR 2018 ; Conference date: 11-09-2018 Through 13-09-2018",

year = "2018",

doi = "10.3233/978-1-61499-902-7-57",

language = "English",

series = "Advances in Transdisciplinary Engineering",

publisher = "IOS Press BV",

pages = "57--62",

editor = "Peter Thorvald and Keith Case",

booktitle = "Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research",

address = "Netherlands",

}

Shyha, I, Huo, D, Le, B, Fu, G, Soliman, E & Alzahrani, B 2018, Investigation on micro-slotting of polymer nanocomposites: Cutting forces. in P Thorvald & K Case (eds), Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research. Advances in Transdisciplinary Engineering, vol. 8, IOS Press BV, pp. 57-62, 16th International Conference on Manufacturing Research, ICMR 2018, Skovde, Sweden, 11/09/18. https://doi.org/10.3233/978-1-61499-902-7-57

Investigation on micro-slotting of polymer nanocomposites: Cutting forces. / Shyha, Islam; Huo, Dehong; Le, Bao et al.
Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research. ed. / Peter Thorvald; Keith Case. IOS Press BV, 2018. p. 57-62 (Advances in Transdisciplinary Engineering; Vol. 8).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Investigation on micro-slotting of polymer nanocomposites

T2 - 16th International Conference on Manufacturing Research, ICMR 2018

AU - Shyha, Islam

AU - Huo, Dehong

AU - Le, Bao

AU - Fu, Guoyu

AU - Soliman, Essam

AU - Alzahrani, Bandar

PY - 2018

Y1 - 2018

N2 - Graphene and halloysite nano-clay have been employed as reinforcements in polymeric nanocomposites due to their superior properties such as high strength, thermal conductivity while epoxy and polyester (PE) are the most popular polymers that have been widely applied in industry as structural material. In the present study, GNP and halloysite nano-clay were used as nano-fillers to reinforce epoxy and polyester matrix, respectively. Micro end milling trials were conducted on a 3-axis ultraprecision CNC machine tool and cutting forces were measured. Higher cutting forces were recorded when cutting graphene/epoxy specimens compared with the nano-clay/PE at higher cutting speed of 188.5 m/min.

AB - Graphene and halloysite nano-clay have been employed as reinforcements in polymeric nanocomposites due to their superior properties such as high strength, thermal conductivity while epoxy and polyester (PE) are the most popular polymers that have been widely applied in industry as structural material. In the present study, GNP and halloysite nano-clay were used as nano-fillers to reinforce epoxy and polyester matrix, respectively. Micro end milling trials were conducted on a 3-axis ultraprecision CNC machine tool and cutting forces were measured. Higher cutting forces were recorded when cutting graphene/epoxy specimens compared with the nano-clay/PE at higher cutting speed of 188.5 m/min.

KW - Cutting force

KW - Micro-milling

KW - Nanocomposites

KW - Nanomaterials

UR - https://www.scopus.com/pages/publications/85057390863

U2 - 10.3233/978-1-61499-902-7-57

DO - 10.3233/978-1-61499-902-7-57

M3 - Conference contribution

AN - SCOPUS:85057390863

T3 - Advances in Transdisciplinary Engineering

SP - 57

EP - 62

BT - Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research

A2 - Thorvald, Peter

A2 - Case, Keith

PB - IOS Press BV

Y2 - 11 September 2018 through 13 September 2018

ER -

Shyha I, Huo D, Le B, Fu G, Soliman E, Alzahrani B. Investigation on micro-slotting of polymer nanocomposites: Cutting forces. In Thorvald P, Case K, editors, Advances in Manufacturing Technology XXXII - Proceedings of the 16th International Conference on Manufacturing Research, ICMR 2018, incorporating the 33rd National Conference on Manufacturing Research. IOS Press BV. 2018. p. 57-62. (Advances in Transdisciplinary Engineering). doi: 10.3233/978-1-61499-902-7-57

Investigation on micro-slotting of polymer nanocomposites: Cutting forces

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this