Influence of material positioning during modified friction stir clinching brazing of Al/Zn/Cu welds

Moslem Paidar; Marischa Elveny; Sadok Mehrez; S. Ravi; Behzad Babaei; M. Ravichandran

doi:10.1016/j.matlet.2021.130250

Influence of material positioning during modified friction stir clinching brazing of Al/Zn/Cu welds

Moslem Paidar
, Marischa Elveny
, Sadok Mehrez
, S. Ravi
, Behzad Babaei
, M. Ravichandran

Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

8 Scopus citations

Abstract

The influence of material positioning during modified friction stir clinching brazing (MFSCB) of Cu/Al (condition #1) and Al/Cu (condition #2) with the use of Zn as interlayer on metallurgical and mechanical properties was assessed. It was found that properties of MFSCB joints are markedly affected by the positioning of the materials. Further, results demonstrated that in condition #1, when pure Cu was placed on top of the AA5083, a sound weld without any crack at the brazed zone was created and the fracture load of the joint during peel test appreciably improved (approximately 30%) in comparison with condition #2.

Original language	English
Article number	130250
Journal	Materials Letters
Volume	301
DOIs	https://doi.org/10.1016/j.matlet.2021.130250
State	Published - 15 Oct 2021

Keywords

Intermetallic alloys and compounds
Material positioning
Microstructure
Modified friction stir clinching brazing

Access to Document

10.1016/j.matlet.2021.130250

Cite this

@article{5549f1b7b9c24af2b7bc64615bbc1f41,

title = "Influence of material positioning during modified friction stir clinching brazing of Al/Zn/Cu welds",

abstract = "The influence of material positioning during modified friction stir clinching brazing (MFSCB) of Cu/Al (condition \#1) and Al/Cu (condition \#2) with the use of Zn as interlayer on metallurgical and mechanical properties was assessed. It was found that properties of MFSCB joints are markedly affected by the positioning of the materials. Further, results demonstrated that in condition \#1, when pure Cu was placed on top of the AA5083, a sound weld without any crack at the brazed zone was created and the fracture load of the joint during peel test appreciably improved (approximately 30\%) in comparison with condition \#2.",

keywords = "Intermetallic alloys and compounds, Material positioning, Microstructure, Modified friction stir clinching brazing",

author = "Moslem Paidar and Marischa Elveny and Sadok Mehrez and S. Ravi and Behzad Babaei and M. Ravichandran",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier B.V.",

year = "2021",

month = oct,

day = "15",

doi = "10.1016/j.matlet.2021.130250",

language = "English",

volume = "301",

journal = "Materials Letters",

issn = "0167-577X",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Influence of material positioning during modified friction stir clinching brazing of Al/Zn/Cu welds

AU - Paidar, Moslem

AU - Elveny, Marischa

AU - Mehrez, Sadok

AU - Ravi, S.

AU - Babaei, Behzad

AU - Ravichandran, M.

PY - 2021/10/15

Y1 - 2021/10/15

N2 - The influence of material positioning during modified friction stir clinching brazing (MFSCB) of Cu/Al (condition #1) and Al/Cu (condition #2) with the use of Zn as interlayer on metallurgical and mechanical properties was assessed. It was found that properties of MFSCB joints are markedly affected by the positioning of the materials. Further, results demonstrated that in condition #1, when pure Cu was placed on top of the AA5083, a sound weld without any crack at the brazed zone was created and the fracture load of the joint during peel test appreciably improved (approximately 30%) in comparison with condition #2.

AB - The influence of material positioning during modified friction stir clinching brazing (MFSCB) of Cu/Al (condition #1) and Al/Cu (condition #2) with the use of Zn as interlayer on metallurgical and mechanical properties was assessed. It was found that properties of MFSCB joints are markedly affected by the positioning of the materials. Further, results demonstrated that in condition #1, when pure Cu was placed on top of the AA5083, a sound weld without any crack at the brazed zone was created and the fracture load of the joint during peel test appreciably improved (approximately 30%) in comparison with condition #2.

KW - Intermetallic alloys and compounds

KW - Material positioning

KW - Microstructure

KW - Modified friction stir clinching brazing

UR - https://www.scopus.com/pages/publications/85108434390

U2 - 10.1016/j.matlet.2021.130250

DO - 10.1016/j.matlet.2021.130250

M3 - Article

AN - SCOPUS:85108434390

SN - 0167-577X

VL - 301

JO - Materials Letters

JF - Materials Letters

M1 - 130250

ER -

Influence of material positioning during modified friction stir clinching brazing of Al/Zn/Cu welds

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this