Corrosion and wear behavior of TiN PVD coated 304 stainless-steel

Awais Awan; Riffat Asim Pasha; Muhammad Shoaib Butt; Rizwan Ahmed Malik; Ibrahim M. Alarifi; Meshal Alzaid; Muhammad Latif; Ammar Naseer; Mohsin Saleem; Hussein Alrobei

doi:10.1007/s12206-020-0714-2

Corrosion and wear behavior of TiN PVD coated 304 stainless-steel

Awais Awan
, Riffat Asim Pasha
, Muhammad Shoaib Butt
, Rizwan Ahmed Malik
, Ibrahim M. Alarifi
, Meshal Alzaid
, Muhammad Latif
, Ammar Naseer
, Mohsin Saleem
, Hussein Alrobei

Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

20 Scopus citations

Abstract

Ti/TiN multilayered physical vapor deposition (PVD) coatings were deposited on stainless-steel by cathodic arc deposition method. Bare sample of stainless steel 304 was compared with monolithic TiN coating and TiN coating having 2, 4, 6 and 8 Ti interlayers. The properties like corrosion and wear resistance were studied and analyzed comparatively. Potentiodynamic polarization curves showed that highest corrosion resistance was indicated by TiN coating with 8 Ti interlayers. Sample having 8 Ti interlayers have high corrosion potential (Ecorr) and low corrosion current density (I_corr) as compared to other samples. This may be attributed to the arrangement of interlayers that prevents the corrosive agents to penetrate surface. All multi-layered coatings show better results than the substrate material. Pin on disk wear test revealed that coating having monolithic TiN layer have the lowest coefficient of friction and consequently have less wear volume and wear rate as compared to other coatings with Ti interlayers. These results made the investigated coated stainless steel 304 valuable for wide range of industrial applications that required wear and corrosion resistance.

Original language	English
Pages (from-to)	3227-3232
Number of pages	6
Journal	Journal of Mechanical Science and Technology
Volume	34
Issue number	8
DOIs	https://doi.org/10.1007/s12206-020-0714-2
State	Published - 1 Aug 2020

Keywords

Coefficient of friction
Corrosion resistance
Physical vapor deposition (PVD)
TiN
Wear

Access to Document

10.1007/s12206-020-0714-2

Cite this

@article{c15f045b177d4b99a6506b7b1904913f,

title = "Corrosion and wear behavior of TiN PVD coated 304 stainless-steel",

abstract = "Ti/TiN multilayered physical vapor deposition (PVD) coatings were deposited on stainless-steel by cathodic arc deposition method. Bare sample of stainless steel 304 was compared with monolithic TiN coating and TiN coating having 2, 4, 6 and 8 Ti interlayers. The properties like corrosion and wear resistance were studied and analyzed comparatively. Potentiodynamic polarization curves showed that highest corrosion resistance was indicated by TiN coating with 8 Ti interlayers. Sample having 8 Ti interlayers have high corrosion potential (Ecorr) and low corrosion current density (Icorr) as compared to other samples. This may be attributed to the arrangement of interlayers that prevents the corrosive agents to penetrate surface. All multi-layered coatings show better results than the substrate material. Pin on disk wear test revealed that coating having monolithic TiN layer have the lowest coefficient of friction and consequently have less wear volume and wear rate as compared to other coatings with Ti interlayers. These results made the investigated coated stainless steel 304 valuable for wide range of industrial applications that required wear and corrosion resistance.",

keywords = "Coefficient of friction, Corrosion resistance, Physical vapor deposition (PVD), TiN, Wear",

author = "Awais Awan and Pasha, \{Riffat Asim\} and Butt, \{Muhammad Shoaib\} and Malik, \{Rizwan Ahmed\} and Alarifi, \{Ibrahim M.\} and Meshal Alzaid and Muhammad Latif and Ammar Naseer and Mohsin Saleem and Hussein Alrobei",

note = "Publisher Copyright: {\textcopyright} 2020, The Korean Society of Mechanical Engineers and Springer-Verlag GmbH Germany, part of Springer Nature.",

year = "2020",

month = aug,

day = "1",

doi = "10.1007/s12206-020-0714-2",

language = "English",

volume = "34",

pages = "3227--3232",

journal = "Journal of Mechanical Science and Technology",

issn = "1738-494X",

publisher = "Korean Society of Mechanical Engineers",

number = "8",

}

TY - JOUR

T1 - Corrosion and wear behavior of TiN PVD coated 304 stainless-steel

AU - Awan, Awais

AU - Pasha, Riffat Asim

AU - Butt, Muhammad Shoaib

AU - Malik, Rizwan Ahmed

AU - Alarifi, Ibrahim M.

AU - Alzaid, Meshal

AU - Latif, Muhammad

AU - Naseer, Ammar

AU - Saleem, Mohsin

AU - Alrobei, Hussein

PY - 2020/8/1

Y1 - 2020/8/1

N2 - Ti/TiN multilayered physical vapor deposition (PVD) coatings were deposited on stainless-steel by cathodic arc deposition method. Bare sample of stainless steel 304 was compared with monolithic TiN coating and TiN coating having 2, 4, 6 and 8 Ti interlayers. The properties like corrosion and wear resistance were studied and analyzed comparatively. Potentiodynamic polarization curves showed that highest corrosion resistance was indicated by TiN coating with 8 Ti interlayers. Sample having 8 Ti interlayers have high corrosion potential (Ecorr) and low corrosion current density (Icorr) as compared to other samples. This may be attributed to the arrangement of interlayers that prevents the corrosive agents to penetrate surface. All multi-layered coatings show better results than the substrate material. Pin on disk wear test revealed that coating having monolithic TiN layer have the lowest coefficient of friction and consequently have less wear volume and wear rate as compared to other coatings with Ti interlayers. These results made the investigated coated stainless steel 304 valuable for wide range of industrial applications that required wear and corrosion resistance.

AB - Ti/TiN multilayered physical vapor deposition (PVD) coatings were deposited on stainless-steel by cathodic arc deposition method. Bare sample of stainless steel 304 was compared with monolithic TiN coating and TiN coating having 2, 4, 6 and 8 Ti interlayers. The properties like corrosion and wear resistance were studied and analyzed comparatively. Potentiodynamic polarization curves showed that highest corrosion resistance was indicated by TiN coating with 8 Ti interlayers. Sample having 8 Ti interlayers have high corrosion potential (Ecorr) and low corrosion current density (Icorr) as compared to other samples. This may be attributed to the arrangement of interlayers that prevents the corrosive agents to penetrate surface. All multi-layered coatings show better results than the substrate material. Pin on disk wear test revealed that coating having monolithic TiN layer have the lowest coefficient of friction and consequently have less wear volume and wear rate as compared to other coatings with Ti interlayers. These results made the investigated coated stainless steel 304 valuable for wide range of industrial applications that required wear and corrosion resistance.

KW - Coefficient of friction

KW - Corrosion resistance

KW - Physical vapor deposition (PVD)

KW - TiN

KW - Wear

UR - https://www.scopus.com/pages/publications/85089029198

U2 - 10.1007/s12206-020-0714-2

DO - 10.1007/s12206-020-0714-2

M3 - Article

AN - SCOPUS:85089029198

SN - 1738-494X

VL - 34

SP - 3227

EP - 3232

JO - Journal of Mechanical Science and Technology

JF - Journal of Mechanical Science and Technology

IS - 8

ER -

Corrosion and wear behavior of TiN PVD coated 304 stainless-steel

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this