Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]

Sohail Nadeem; Shahbaz Ali; Nevzat Akkurt; Mohamed Bechir Ben Hamida; Shahah Almutairi; Hassan Ali Ghazwani; Sayed M. Eldin; Zareen A. Khan; A. S. Al-Shafay

doi:10.1016/j.aej.2023.07.029

Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]

Sohail Nadeem
, Shahbaz Ali
, Nevzat Akkurt
, Mohamed Bechir Ben Hamida
, Shahah Almutairi
, Hassan Ali Ghazwani
, Sayed M. Eldin
, Zareen A. Khan
, A. S. Al-Shafay

Research output: Contribution to journal › Comment/debate

Abstract

The authors regards, In the original article, in Ref. [16], the citation was incorrectly stated as: H. Liu et al., 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin, Micromachines (2017) 8. However, upon thorough review and verification, the authors have discovered that the correct citation should be as follows: V. Carvalho, N. Rodrigues, R. Ribeiro, P.F. Costa, R.A. Lima, S.F.C.F. Teixeira, 3D printed biomodels for flow visualization in stenotic vessels: An experimental and numerical study, Micromachines, vol. 11, no. 6, doi: 10.3390/mi11060549. The authors deeply apologize for this oversight and any confusion it may have caused to the readers and the scholarly community. It is crucial to ensure the accuracy and integrity of their citations, and they sincerely regret any inconvenience this may have caused.

Original language	English
Pages (from-to)	306
Number of pages	1
Journal	Alexandria Engineering Journal
Volume	78
DOIs	https://doi.org/10.1016/j.aej.2023.07.029
State	Published - 1 Sep 2023
Externally published	Yes

Access to Document

10.1016/j.aej.2023.07.029

Fingerprint

Dive into the research topics of 'Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]'. Together they form a unique fingerprint.

Cite this

Nadeem, S., Ali, S., Akkurt, N., Bechir Ben Hamida, M., Almutairi, S., Ghazwani, H. A., Eldin, S. M., Khan, Z. A., & Al-Shafay, A. S. (2023). Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]. Alexandria Engineering Journal, 78, 306. https://doi.org/10.1016/j.aej.2023.07.029

@article{e73c3b2c3a5b415e8ac2e7269449a354,

title = "Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]",

abstract = "The authors regards, In the original article, in Ref. [16], the citation was incorrectly stated as: H. Liu et al., 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin, Micromachines (2017) 8. However, upon thorough review and verification, the authors have discovered that the correct citation should be as follows: V. Carvalho, N. Rodrigues, R. Ribeiro, P.F. Costa, R.A. Lima, S.F.C.F. Teixeira, 3D printed biomodels for flow visualization in stenotic vessels: An experimental and numerical study, Micromachines, vol. 11, no. 6, doi: 10.3390/mi11060549. The authors deeply apologize for this oversight and any confusion it may have caused to the readers and the scholarly community. It is crucial to ensure the accuracy and integrity of their citations, and they sincerely regret any inconvenience this may have caused.",

author = "Sohail Nadeem and Shahbaz Ali and Nevzat Akkurt and \{Bechir Ben Hamida\}, Mohamed and Shahah Almutairi and Ghazwani, \{Hassan Ali\} and Eldin, \{Sayed M.\} and Khan, \{Zareen A.\} and Al-Shafay, \{A. S.\}",

note = "Publisher Copyright: {\textcopyright} 2023 THE AUTHORS",

year = "2023",

month = sep,

day = "1",

doi = "10.1016/j.aej.2023.07.029",

language = "English",

volume = "78",

pages = "306",

journal = "Alexandria Engineering Journal",

issn = "1110-0168",

publisher = "Elsevier B.V.",

}

Nadeem, S, Ali, S, Akkurt, N, Bechir Ben Hamida, M, Almutairi, S, Ghazwani, HA, Eldin, SM, Khan, ZA & Al-Shafay, AS 2023, 'Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]', Alexandria Engineering Journal, vol. 78, pp. 306. https://doi.org/10.1016/j.aej.2023.07.029

Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]. / Nadeem, Sohail; Ali, Shahbaz; Akkurt, Nevzat et al.
In: Alexandria Engineering Journal, Vol. 78, 01.09.2023, p. 306.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]

AU - Nadeem, Sohail

AU - Ali, Shahbaz

AU - Akkurt, Nevzat

AU - Bechir Ben Hamida, Mohamed

AU - Almutairi, Shahah

AU - Ghazwani, Hassan Ali

AU - Eldin, Sayed M.

AU - Khan, Zareen A.

AU - Al-Shafay, A. S.

PY - 2023/9/1

Y1 - 2023/9/1

N2 - The authors regards, In the original article, in Ref. [16], the citation was incorrectly stated as: H. Liu et al., 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin, Micromachines (2017) 8. However, upon thorough review and verification, the authors have discovered that the correct citation should be as follows: V. Carvalho, N. Rodrigues, R. Ribeiro, P.F. Costa, R.A. Lima, S.F.C.F. Teixeira, 3D printed biomodels for flow visualization in stenotic vessels: An experimental and numerical study, Micromachines, vol. 11, no. 6, doi: 10.3390/mi11060549. The authors deeply apologize for this oversight and any confusion it may have caused to the readers and the scholarly community. It is crucial to ensure the accuracy and integrity of their citations, and they sincerely regret any inconvenience this may have caused.

AB - The authors regards, In the original article, in Ref. [16], the citation was incorrectly stated as: H. Liu et al., 3D printing of artificial blood vessel: study on multi-parameter optimization design for vascular molding effect in alginate and gelatin, Micromachines (2017) 8. However, upon thorough review and verification, the authors have discovered that the correct citation should be as follows: V. Carvalho, N. Rodrigues, R. Ribeiro, P.F. Costa, R.A. Lima, S.F.C.F. Teixeira, 3D printed biomodels for flow visualization in stenotic vessels: An experimental and numerical study, Micromachines, vol. 11, no. 6, doi: 10.3390/mi11060549. The authors deeply apologize for this oversight and any confusion it may have caused to the readers and the scholarly community. It is crucial to ensure the accuracy and integrity of their citations, and they sincerely regret any inconvenience this may have caused.

UR - https://www.scopus.com/pages/publications/85165955220

U2 - 10.1016/j.aej.2023.07.029

DO - 10.1016/j.aej.2023.07.029

M3 - Comment/debate

AN - SCOPUS:85165955220

SN - 1110-0168

VL - 78

SP - 306

JO - Alexandria Engineering Journal

JF - Alexandria Engineering Journal

ER -

Corrigendum to “Modeling and numerical simulation of non-Newtonian arterial blood flow for mild to severe stenosis” [Alex. Eng. J. 72 (2023) 195–211, (S1110016823002594), (10.1016/j.aej.2023.03.088)]

Abstract

Access to Document

Other files and links

Fingerprint

Cite this