Behaviour of a high pressure sodium lamp fed by a pulsed power supply

W. Nsibi; M. N. Nehdi; A. Chammam; H. Elloumi; A. Sellami; G. Zissis

doi:10.1177/1477153513506431

Behaviour of a high pressure sodium lamp fed by a pulsed power supply

W. Nsibi
, M. N. Nehdi
, A. Chammam
, H. Elloumi
, A. Sellami
, G. Zissis

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

The aim of this paper is to present the colorimetric and photometric results for a pulsed power supply operated high pressure sodium (HPS) lamp. Especially, we are interested in controlling the spectral response radiation of the yellow D line. This sodium D line is composed of two spectral components, one at 589.6 nm and the other at 589.0 nm. The pulsed power supply is a driver for the HPS lamp based on the application of a low frequency (50 Hz) square current waveform through the lamp with one or more pulses on each half cycle. A description is given of the physical modeling of the arc's behaviour. Experimental results obtained from our laboratory power supply for a 400 W HPS lamp supplied at 50 Hz and simulations are shown.

Original language	English
Pages (from-to)	739-746
Number of pages	8
Journal	Lighting Research and Technology
Volume	46
Issue number	6
DOIs	https://doi.org/10.1177/1477153513506431
State	Published - 20 Dec 2014
Externally published	Yes

Access to Document

10.1177/1477153513506431

Cite this

@article{c95c3b730b144b2ab3558c2d646d482e,

title = "Behaviour of a high pressure sodium lamp fed by a pulsed power supply",

abstract = "The aim of this paper is to present the colorimetric and photometric results for a pulsed power supply operated high pressure sodium (HPS) lamp. Especially, we are interested in controlling the spectral response radiation of the yellow D line. This sodium D line is composed of two spectral components, one at 589.6 nm and the other at 589.0 nm. The pulsed power supply is a driver for the HPS lamp based on the application of a low frequency (50 Hz) square current waveform through the lamp with one or more pulses on each half cycle. A description is given of the physical modeling of the arc's behaviour. Experimental results obtained from our laboratory power supply for a 400 W HPS lamp supplied at 50 Hz and simulations are shown.",

author = "W. Nsibi and Nehdi, \{M. N.\} and A. Chammam and H. Elloumi and A. Sellami and G. Zissis",

note = "Publisher Copyright: {\textcopyright} The Chartered Institution of Building Services Engineers 2013.",

year = "2014",

month = dec,

day = "20",

doi = "10.1177/1477153513506431",

language = "English",

volume = "46",

pages = "739--746",

journal = "Lighting Research and Technology",

issn = "1477-1535",

publisher = "SAGE Publications Ltd",

number = "6",

}

TY - JOUR

T1 - Behaviour of a high pressure sodium lamp fed by a pulsed power supply

AU - Nsibi, W.

AU - Nehdi, M. N.

AU - Chammam, A.

AU - Elloumi, H.

AU - Sellami, A.

AU - Zissis, G.

PY - 2014/12/20

Y1 - 2014/12/20

N2 - The aim of this paper is to present the colorimetric and photometric results for a pulsed power supply operated high pressure sodium (HPS) lamp. Especially, we are interested in controlling the spectral response radiation of the yellow D line. This sodium D line is composed of two spectral components, one at 589.6 nm and the other at 589.0 nm. The pulsed power supply is a driver for the HPS lamp based on the application of a low frequency (50 Hz) square current waveform through the lamp with one or more pulses on each half cycle. A description is given of the physical modeling of the arc's behaviour. Experimental results obtained from our laboratory power supply for a 400 W HPS lamp supplied at 50 Hz and simulations are shown.

AB - The aim of this paper is to present the colorimetric and photometric results for a pulsed power supply operated high pressure sodium (HPS) lamp. Especially, we are interested in controlling the spectral response radiation of the yellow D line. This sodium D line is composed of two spectral components, one at 589.6 nm and the other at 589.0 nm. The pulsed power supply is a driver for the HPS lamp based on the application of a low frequency (50 Hz) square current waveform through the lamp with one or more pulses on each half cycle. A description is given of the physical modeling of the arc's behaviour. Experimental results obtained from our laboratory power supply for a 400 W HPS lamp supplied at 50 Hz and simulations are shown.

UR - https://www.scopus.com/pages/publications/84911140545

U2 - 10.1177/1477153513506431

DO - 10.1177/1477153513506431

M3 - Article

AN - SCOPUS:84911140545

SN - 1477-1535

VL - 46

SP - 739

EP - 746

JO - Lighting Research and Technology

JF - Lighting Research and Technology

IS - 6

ER -

Behaviour of a high pressure sodium lamp fed by a pulsed power supply

Abstract

Access to Document

Other files and links

Fingerprint

Cite this