An Integrated Switchable em Absorber and Beam Switchable Radiator

In this research work, a multifunctional metamaterial inspired surface is designed for two different applications, namely, electromagnetic (EM) absorber and radiator with pattern agility. The designed surface consists of periodic arrays of metallic loops and circular patches printed on a thin grounded dielectric slab. Lumped resistors are fixed in the outer ring where the inner patch is connected to the feeding network through metallic vias. Firstly, the basic unit cell of the surface is utilized as a dual-band EM absorber. Secondly, the same surface is utilized as a beam switching radiator. Each unit cell has two switchable feeding points which are connected to a single-pole double-throw (SPDT) switch designed on the bottom layer. The surface is symmetrical therefore the excitation of each unit cell at two feeding ports can produce a phase shift of 180°. By properly selecting the feeding point of the four elements, the surface can generate sum-beams and difference-beams. The surface exhibit low radar cross section (RCS), high gain, and high efficiency. A prototype of {4} times {4} elements array is manufactured and experimentally verified in an anechoic chamber.