A Study of the Influence of Additives of Nanostructured Functional Ceramics in the Coating of Welding Electrodes on their Welding and Technological Properties

The present work aims to study the influence of Nanostructured Functional Ceramics Photocatalysts (PNFC) under the brand name ZB-2, obtained using a synthesis method deploying pulsed radiation activation technology on welding and technological properties. This method of obtaining ceramic material allows the latter to be produced on an industrial scale. Therefore, it can replace the technology for producing PNFC under the influence of concentrated solar radiation at the Big Solar Furnace (BSF) of the Institute of Materials Science, Academy of Sciences of the Republic of Uzbekistan. The ZB-2 ceramic material has shown its effectiveness when used as an additive in the coating charge of the MR-3 welding electrode. Thus, the breaking arc length of the MR-3 welding electrode is increased up to 2% with the addition of ZB-2 to the coating charge. With additions of more than 2%, the breaking arc length decreases. The additive ZB-2 has the same effect on the diameter of the deposited point of the MP-3 welding electrode. When its content in the coating is up to 2%, the diameter of the deposited point increases, and a further increase in the additive content reduces this indicator. Adding up to 1% ZB-2 into the coating composition has a beneficial effect on the size of the peak at the end of the electrode. When its content exceeds 1%, the latter decreases. Also, an increase in the content of the PNFC additive in the coating of the MR-3 electrode reduces the value of the melting coefficient and increases the value of the deposition coefficient, which contributes to a sharp reduction in losses due to waste and spattering up to 53% when the additive content in the coating mass is up to 8%.